Shindaiwa 78702 Operator's Manual download pdf (Page 3)

CAUTION!

 Always maintain the Multipurpose Pole Pruner Tool according to this owner’s manual and follow the recommended

scheduled maintenance.

 Never modify or disable any of the pruner’s safety devices.

 Always use genuine Shindaiwa parts and accessories when repairing or maintaining this machine.

 Do not make unauthorized modications to the pole pruner.

 When transporting the pole pruner in a vehicle, tie it down securely to prevent fuel spillage or damage to the machine.

 Always clear your work area of trash or hidden debris to help ensure good footing.

 Keep the chain sharp and properly adjusted.

 Keep the pole pruner as clean as possible. Keep it free of loose vegetation, mud, debris, etc.

Operating Precautions

 This Shindaiwa pole pruner tool

is specically designed for use on

the Shindaiwa Multipurpose Tool

Carrier. Installation and/or use on

any other model, brand or type

of power tool is not approved by

Shindaiwa. Attempts to use on

non-approved models can dam-

age the equipment and cause

accidents, serious injury or death.

 Make sure the chain and sprocket

are correctly adjusted before

operating the pruner (see for

adjustment procedures). Never

attempt chain adjustment with

the engine running!

 Always make sure the cutting at-

tachment is properly installed and

rmly tightened before operation.



 Never use a cracked or warped

guide bar: replace it with a service-

able one and make sure it ts

properly.

WARNING!

 If a saw blade should bind fast in

a cut, shut off the engine immedi-

ately. Push the branch or tree to

ease the bind and free the blade.

 Before starting the engine, make

sure the saw chain is not contact-

ing anything.

 When cutting a limb that is under

tension, be alert for springback so

that you will not be struck by the

moving limb.

 Always run at wide open throttle

(WOT) before contacting material

to be cut.

 Always stop the engine imme-

diately and check for damage if

you strike a foreign object or if the

machine becomes tangled. Do not

operate with broken or damaged

equipment.

 Stop the machine immediately if

it suddenly begins to vibrate or

shake. Inspect for broken, miss-

ing or improperly installed parts or

attachments.

 Never transport the pruner or set

it down with the engine running.

An engine that’s running could be

accidently accelerated causing

the chain to rotate.

 Make sure the scabbard is in

place when transporting the

pruner.

 When carrying by hand, the chain

should be pointing backward.

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments

Shindaiwa 78702 Operator's Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Shindaiwa 78702