SHINDAIWA GRASS TRIMMER TO BLADE CONVERSION INSTRUCTIONSWARNING!Minimize the risk of injury to yourself and others! Read the Owner's/Opera-tor&ap
10NOTES
ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation
2CAUTION!A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.IMPORTANT!A statement
3Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing informat
4AssemblyRemoving the Existing Cutting Attachment Shield 1. Remove the four socket-head cap screws (A), bracket (B) and two shims (C). 2. Remove th
5Install Handle and Barrier Bar1. Install handle and barrier.Install Hanger1. Slide hanger (A) onto outer tube & position as shown. Attach with 5x
6Install New Cutting Attachment ShieldSub-Shield. (when trimmer head is in use)1. Attach the sub-shield (G) extension to the cutting attachment shiel
726107DCBAInstalling Brushcutter BladeCAUTION!Install the blade (E) so its printed surface is visible to the operator when the brushcutter is in the n
8Shoulder Strap NOTE:Although a shoulder strap accessory is not required for use with a grass trimmer, a shoulder strap can increase operator comfort
Comments to this Manuals