Shindaiwa T350 Operator's Manual

SHINDAIWA OWNER’S/OPERTOR'S MANUALT350 GRASS TRIMMERC350/B450 BRUSHCUTTERWARNING!C350/B450Part Number 62102-94310 Rev. 02/05T350Read this manua

10Cutting Attachment Shield AssemblyWARNING!NEVER operate this machine without the cutting attachment shield. Operating without the cutting attach

11Installing a Blade(1) Make sure the switch is off and the engine is stopped.(2) Wear gloves to protect your hands.(3) Turn the unit over so the saw

12Mixing FuelFilling The Fuel Tank1. Place the unit on a flat, level surface, and wipe any debris from around the fuel cap.2. Remove the fuel cap.3.

13WARNING!MAKE SURE THE BLADE IS WELL CLEAR OF ANY INTERFERENCE. Before starting the engine, place unit on clear, level surface. Make sure

14Stopping the EngineIdle the engine briey before stop-ping, then slide the ON-OFF switch to the “O” (for STOP) position.WARNING!The cutting attachme

15CAUTION!To prevent possible engine damage, do not allow the machine to run at high speeds without a load. Avoid operating the engine at low speeds.

16MaintenanceWARNING!Before performing any main-tenance, repair, or cleaning work on the machine, make sure the engine and cutting attachment are comp

1710 Hour MaintenanceCAUTION!Do not operate the machine if the air cleaner or element is damaged, or if the element is water-soaked.Remove the air c

18Long Term StorageWhenever the unit will not be used for 30 days or longer, use the following procedures to prepare it for storage: Clean external p

19Does the engine crank?Faulty recoil starter.Fluid in the crankcase.Internal damage.Consult with an authorizedservicing dealer.Consult with an author

2Throughout this manual are special atten-tion statements.WARNING!A statement preceded by the triangular attention symbol and the word “WARN-ING” cont

20Low Power OutputTroubleshooting Guide (Continued)Is the engineoverheating?Operator is overworkingthe unit.Carburetor mixture istoo lean.Improper fue

21Inspect and replace attachment as required.Tighten gearcase securely.Inspect and replace as necessary.Pooracceleration.Clogged air filter.Clogged

22DECLARATIONOFCONFORMITYWe hereby declare the Shindaiwa Engine Engine Brushcutter, Model RM 350 (T350/EC1, C350/EC1).meets the following respective r

23DECLARATIONOFCONFORMITYWe hereby declare the Shindaiwa Engine Engine Brushcutter, Model RM 450 (T450/EC1, B450/EC1).meets the following respective r

NOTES:Shindaiwa Inc.11975 S.W. Herman Rd.Tualatin, Oregon 97062 USATelephone: 503 692-3070Fax: 503 692-6696www.shindaiwa.comShindaiwa Kogyo Co., Ltd

3Work SafelyTrimmers and brushcutters operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a per

4SAFETYBe Aware of the Working Environment Avoid long-term opera-tion in very hot or very cold weather. Make sure bystanders or observers outside the

5Safety LabelsIMPORTANT!Safety and Operation Information Labels: Make sure all informa-tion labels are undamaged and readable. Immediately replace dam

6SpecicationsUnit DescriptionOuter TubeGripCutting Attachment ShieldUsing the accompanying illustrations as a guide, familiarize yourself with this u

7Prior to AssemblyBefore assembling, make sure you have all the components required for a complete unit: Engine assembly Outer tube assembly Cut

8Assembling the Outer TubeNOTE:Make sure that the throttle cable is built into the cable guide of the throttle lever.(8) Shift the throttle lever back

9Assembly of the Handle T350WARNING!NEVER operate this machine without the front handle. Oper-ating without the front handle may result in serious inj