Shindaiwa HT230 Operator's Manual download pdf (Page 8)

Specifications

Model ......................................................................................... HT230-30/HT230-40

Engine Model ................................................................................................. SHT230

Engine Type ................................................ 2-cycle, horizontal cylinder, air cooled

Engine Bore x Stroke ........................................................................ 32mm x 28mm

Engine Displacement ........................................................................................ 22.5cc

Engine Weight, (dry) .......................................................................... 2.6kg (5.73 lb)

Max. Power .................................................................................. 1.1 hp @ 8000 rpm

Fuel/Oil Ratio ............................50:1 with Shindaiwa Premium 2-cycle mixing oil

Fuel Tank Capacity ............................................................................ 0.7 liter/24 oz.

Carburetor .................................................................. Walbro WYJ,Diaphragm type

Ignition .......................................................... Fully electronic,transistor controlled

Spark Plug ........................................................................................... Champion CJ8

................................ For Electromagnetic Compliance (EMC), use NGK BMR6A

Air Cleaner .......................................................................................... Foam Element

Starting Method ........................................................................................Recoil type

Stopping Method ........................................................ Slide switch, grounding type

Unit Dimensions (LxWxH)

HT230-30: ................................................................................... 990 x 210 x 210mm

HT230-40: ................................................................................. 1330 x 210 x 210mm

Engine and Cutter Weight, Less Fuel

HT230-30: ........................................................................................... 5.5kg (12.23 lb)

HT230-40: ........................................................................................... 6.0kg (13.23 lb)

Blade Length

HT30-30: ........................................................................................................... 740mm

HT230-40: ....................................................................................................... 1080mm

Blade Type ................................. Double-blade cutting action: single-edged blade

Clutch ................................................ Fully automatic centrifugal clutch, dry-type

Gear Type ................................................................................................... Spur gears

Gear Lubrication........................................................ High Quality Lithium Grease

Standard Equipment

Rear handle with integral controls, anti-vibe mountings. Front handle with

guard. Blade scabbard(cover).

Options .............................................................................................. Deflector shield

Specifications subject to change without notice.

DESCRIPTION

HT2324

(or whenever hard starting or

poor performance are noted):

Remove the spark arrester screen, and

use a wire brush to gently remove

excess carbon deposits.

Muffler

Arrester Screen

Arrester

Screw

■ A damaged or otherwise unservice-

able screen must be replaced.

■ If carbon accumulations in the

muffler or cylinder are severe,

return the trimmer to your dealer

for inspection.

WARNING!

Never operate this unit with a

damaged or missing muffler or

spark arrester! Operating with

missing or damaged exhaust

components is a fire hazard, and

may also damage your hearing.

Long Term Storage

MAINTENANCE

Every 135 Hours

CAUTION!

Gasoline stored in the carburetor

for extended periods can cause

hard starting, and could also lead

to increased service and mainte-

nance costs.

Whenever the unit will not be used for

30 days or longer, use the following

procedures to prepare it for storage:

■ Clean external parts thoroughly.

■ Drain all the fuel from the carbure-

tor and the fuel tank.

IMPORTANT!

All stored fuels should be stabilized

with a fuel stabilizer such as

STA-BIL姞.

To remove the remaining fuel from

the fuel lines and carburetor and with

the fuel drained from the fuel tank.

1. Prime the primer bulb until no

more fuel is passing through.

2. Start and run the engine until it

stops running.

3. Repeat steps 1 and 2 until the

engine will no longer start.

■ Remove the spark plug and pour

about 1/4 ounce of 2-cycle mixing

oil into the cylinder through the

spark plug hole. Slowly pull the

recoil starter 2 or 3 times so oil will

evenly coat the interior of the

engine. Reinstall the spark plug.

■ Before storing the unit, repair or

replace any worn or damaged parts.

■ Remove the air cleaner element

from the carburetor and clean it

thoroughly with soap and water, let

dry and reassemble the element.

■ Store the machine in a clean, dust-

free area.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Shindaiwa HT230 Operator's Manual Page 8

Comments to this Manuals

Related products and manuals for Power hedge trimmers Shindaiwa HT230