Shindaiwa C-35 Operator's Manual download pdf (Page 5)

5

Be Aware of the Working Environment

(all units)

ALWAYS make sure the cutting attachment is

properly installed and rmly tightened before

operation.

NEVER use a cracked or warped cutting

attachment: If a properly installed attachment

vibrates, replace the attachment with a new

one and re-check.

WARNING!

ALWAYS stop the engine immediately and

check for damage if you strike a foreign

object or if the unit becomes tangled. Do not

operate with broken or damaged equipment.

NEVER allow the engine to run at high RPM

without a load. Doing so could damage the

engine.

NEVER operate a unit with worn or dam-

aged fasteners or attachment holders.

Avoid long-term

operation in very hot

or very cold weather.

Make sure

bystanders or

observers outside

the 15 meter

(50 feet) “danger

zone” wear eye

protection.

Be extremely careful

of slippery terrain,

especially during rainy

weather.

If contact is made with a hard object,

stop the engine and inspect the cutting

attachment for damage.

Be constantly alert for

objects and debris that

could be thrown either

from the rotating cutting

attachment or bounced

from a hard surface.

Reduce the risk of bystanders

being struck by ying debris. Make

sure no one is within 15 meters

(50 feet)— that’s about 16 paces

of an operating attachment. Stop

immediately if a child, pet, or

person comes within a 15 meter

(50 feet)radius. Outside this radius,

there is still a risk of injury from

thrown objects.

Beware of a coasting

blade when brushcutting or

edging. A coasting blade

can injure while it continues

to spin after the throttle

trigger is released or after

the engine is stopped.

ALWAYS clear your work area of

trash or hidden debris that could

be thrown back at you or toward

a bystander. When operating in

rocky terrain or near electric wires

or fences, use extreme caution to

avoid contacting such items with

the cutting attachment.

15 METERS

(50 FEET)

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments