Shindaiwa GP3410 Operator's Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
WARNING!
Never make unauthorized
attachment installations.
NEVER smoke or light res near the unit.
ALWAYS stop the engine and allow
it to cool before refueling. Avoid
overlling and wipe off any fuel that
may have spilled.
ALWAYS inspect the unit for fuel leaks
before each use. During each rell,
check that no fuel leaks from around
the fuel cap and/or fuel tank. If fuel
leaks are evident, stop using the
unit immediately. Fuel leaks must be
repaired before using the unit.
ALWAYS move the unit to a place well
away from a fuel storage area or other
readily ammable materials before
starting the engine.
NEVER place ammable material
close to the engine mufer.
NEVER run the engine without the
spark arrester screen in place.
NEVER operate the engine when
transporting the unit.
NEVER operate the engine indoors!
Make sure there is always good ven-
tilation. Fumes from engine exhaust
can cause serious injury or death.
ALWAYS stop the unit immediately if
it suddenly begins to vibrate or shake.
Inspect for broken, missing or improp-
erly installed parts.
ALWAYS keep the unit as clean as
practical. Keep it free of loose vegeta-
tion, mud, etc.
ALWAYS disconnect the spark plug wire
before performing any maintenance work.
Never operate power equipment
of any kind if you are tired or if you
are under the inuence of alcohol,
drugs, medication or any other sub-
stance that could affect your ability
or judgement.
Pumps operate at very high speeds and
can do serious damage or injury if they
are misused or abused. Never allow a
person without training or instruction to
operate this unit!
You must be physically and mentally fit to
operate this unit safely.
General Safety Instructions
Work Safely
Stay Alert
WARNING!
Minimize the Risk of Fire
WARNING!
Use Good Judgment
WARNING!
Safety labels
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are undam-
aged and readable. Immediately replace dam-
aged or missing information labels. New
labels are available from your local authorized
Shindaiwa dealer.
Page view 2
1 2 3 4 5 6 7 8 ... 59 60

Comments to this Manuals

No comments