Shindaiwa DH254 Owner's Manual download pdf (Page 5)

Safety Equipment and Labels

IMPORTANT!

Caution, Danger, Warning, and Operation Information

Labels: Make sure all information labels are undam-

aged and readable. Immediately replace damaged or

missing information labels. New labels are available

from your local authorized Shindaiwa dealer.

Figure 2

Ignition

Switch

Throttle Interlock

Caution Label

CAUTION

READ AND

FOLLOW THE

INSTRUCTIONS

IN THE

OPERATORS

MANUAL.

WEAR EYE

AND HEARING

PROTECTION

AT ALL TIMES

DURING

OPERATION.

THE BLADES

ARE SHARP!

HANDLE WITH

CARE.

KEEPS HANDS

CLEAR OF

CUTTER

BLADES WHEN

STARING THE

ENGINE.

Specications

Specications are subject to change without notice.

Model DH254-24 DH254-30

Engine Type 4-cycle, horizontal cylinder, air cooled

Engine Bore x Stroke 34mm x 27mm (1.34 x 1.06 in)

Engine Displacement 24.5cc (1.5 in

)

Unit Weight, Less Fuel 6.0 kg (13.2 lb) 6.2 kg (13.7 lb)

Unit Dimensions (LxWxH)

1100 x 255 x 230 mm (43.31 x 9.65 x 9.06 in) 1220 x 255 x 230 mm (48.03 x 9.65 x 9.06 in)

Fuel Tank Capacity 0.55 liter/ 18.6 oz.

Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FD class engine Oil

Carburetor Diaphragm type

Ignition Electronic

Spark Plug NGK CMR5H

Electrode Gap 0.6 mm/ .024 in.

Torque 16.7 - 18.6 N∙m / 148-165 in • lbf

Air Cleaner Foam pre-lter; main lter: dry element

Mufer Type Spark arrestor mufer or spark arrestor mufer with catalyst

Starting Method Recoil type

Stopping Method Slide switch,grounding type

Blade Length 610 mm (24.02 in) 740 mm (29.13 in)

Blade Type Double-blade cutting action: double-edged blade

Clutch Type Centrifugal clutch, dry-type

Gear Type Spur gears

Gear Lubrication Lithium-based grease

Standard Equipment

Rear handle with integral controls, anti-vibe mountings

front handle with guard, spark plug wrench

and blade scabbard (cover)

Engine Speed 3,000 RPM

Clutch Engagement Speed 4,100 RPM

Wide Open Throttle Speed (W.O.T.) 10,500 RPM

IMPORTANT!

This spark ignition system complies with the Canadian standard ICES-002.

Protector

Blade Cover

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Shindaiwa DH254 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Power hedge trimmers Shindaiwa DH254