Shindaiwa M242 Operator's Manual download pdf (Page 4)

4

CAUTION!

Operating Precautions

 Always make sure the cutting at-

tachment tool is properly installed

and rmly tightened before opera-

tion.

 Never use a cracked or warped

cutting attachment: replace it with

a serviceable one and make sure it

ts properly.

 Keep the unit away from excessive

heat. Engine fuel is very ammable

and re could lead to serious per-

sonal injury or property damage.

 Make sure there are no missing or

loose fasteners, and that the stop

switch and throttle controls are

working properly.

WARNING!

 Before starting the engine, make

sure the cutting attachment is not

contacting anything.

 Always stop the engine immedi-

ately and check for damage if you

strike a foreign object or if the unit

becomes tangled. Do not operate

with broken or damaged equip-

ment.

 Never transport the unit or set it

down with the engine running. An

engine that’s running could be

accidently accelerated causing the

cutting attachment to rotate.

 Make sure cutter safety guards are

in place when transporting the unit.

Never extend trimming line beyond the

length specied for your unit. Always

keep the unit as clean as practical. Keep

it free of loose vegetation, mud, etc.

Safety Labels

IMPORTANT!

Safety and Operation Information Labels:

Make sure all information labels are

undamaged and readable. Immediately

replace damaged or missing information

labels. New labels are available from your

local authorized Shindaiwa dealer.

M242

Figure 1

This label indicates the

minimum distance between

front handle and rear grip

per ANSI B175.3.

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments