Shindaiwa DH212 User Manual download pdf (Page 20)

ENGLISH

eXhaust system

Spark Arrestor Screen

Level 2.

Tools required: 3 mm Hex wrench, Cross Head Screwdriver, Soft

metal brush

Parts required: Screen, Gasket

Remove engine cover. See “Cleaning Cooling System” for step by step

instructions.

Place piston at Top Dead Center (TDC) to prevent carbon/dirt from

entering cylinder.

Remove exhaust guide (A), gasket (B), and screen (C) from mufer body.

Clean carbon deposits from mufer components.

NOTE

When cleaning carbon deposits, be careful not to damage the cata-

lytic element inside mufer.

Replace screen if it is cracked, plugged or has holes burned through.

Assemble components in reverse order.

NOTE

When installing the cylinder cover, be certain the mufer gasket

tabs (D) are locked into the mufer grill slots and the stop switch

lead is seated in the rubber grommet.

Cylinder Exhaust Port

Level 3.

IMPORTANT

The cylinder exhaust port must be inspected and cleaned of excess

carbon every 3 months or 90 hours of operation in order to main-

tain this engine within the emissions durability period. Shindaiwa

strongly recommends that you return your unit to your Shindaiwa

dealer for this important maintenance service.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 95 96

No comments

Shindaiwa DH212 User Manual Page 20