Shindaiwa EB802RT User Manual download pdf (Page 8)

CAUTION!

Never use any type of gasoline

containing more than 10% alcohol

by volume! Some types of gasoline

contain alcohol as an oxygenate.

Oxygenated gasoline may cause

increased operating temperatures.

Under certain conditions, alcohol-

based gasoline may also reduce

the lubricating qualities of some

2-cycle mixing oils.

Generic oils and some outboard

oils may not be intended for use

in high-performance two-cycle

engines, and should never be used

in your Shindaiwa engine.

■

■

8

NEVER smoke or light res near the

engine.

ALWAYS stop the engine and allow

it to cool before refueling.

ALWAYS Wipe all spilled fuel and

move at least 3 meters from the fuel-

ing point and source before starting.

NEVER place ammable material

close to the engine mufer.

NEVER operate the engine with-

out the mufer and spark arrester

screen in place.

FUEL IS HIGHLY FLAMMABLE.

■

■

■

■

■

■

ALWAYS store gasoline in a con-

tainer approved for ammable liquids.

ALWAYS inspect the unit for fuel

leaks before each use. During each

rell, check that no fuel leaks from

around the fuel cap and/or fuel tank. If

fuel leaks are evident, stop using the

unit immediately. Fuel leaks must be

repaired before using the unit.

ALWAYS move the unit at least 3

meters away from a fuel storage

area or other readily ammable

materials before starting the engine.

■

■

■

Mixing fuel

Place the unit on a ﬂat, level surface.

Clear any dirt or other debris from

around the fuel ﬁller cap.

Remove the fuel cap, and ﬁll the tank

with clean, fresh fuel.

Reinstall the fuel ﬁller cap and tighten

ﬁrmly.

Wipe away any spilled fuel before start-

ing the blower.

1.

2.

3.

4.

5.

Filling the fuel tank

CAUTION!

This engine is designed to operate

on a 50:1 mixture consisting of

unleaded gasoline and ISO-L-EGD

or JASO FC class 2-cycle mixing oil

only. Use of non-approved mixing

oils can lead to excessive carbon

deposits.

Use only fresh, clean unleaded gasoline

with a pump octane of 87 or higher.

Mix all fuel with a 2-cycle air-cooled

mixing oil that meets or exceeds ISO-L-

EGD and/or JASO FC classiﬁed oils at

50:1 gasoline/oil ratio.

■

■

Examples of 50:1 mixing quantities

WARNING!

Minimize the Risk of Fire

Gasoline 2-cycle mixing oil

liters milliliters

2.5 - 1

50 ml

5 - 1 100 ml

10 - 1 200 ml

20 - 1 400 ml

IMPORTANT!

Mix only enough fuel for your immediate

needs! If fuel must be stored longer than 30

days and

oil with fuel stabilizer is not

used, it should ﬁrst be treated with a fuel

stabilizer such as STA-BIL™.

Oil is a registered JASO FC classi-

ﬁed oil and also meets or exceeds ISO-L-EGD

performance requirements. Shindaiwa One is

recommended for use in all Shindaiwa low emis-

sions engines. Shindaiwa One also includes a

fuel stabilizer.

Remove the

Fuel Filler Cap

Figure 11

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Comments to this Manuals

No comments